Product Description
The J-hook magnet is a magnetic hanging point with a neodymium core, low-carbon steel pot and a threaded open hook screwed into the base. The steel cup closes off the magnet sides and drives the flux onto the one face that meets steel. Breakaway pull runs from 2 kg on the D10 up to 280 kg on the D80.
The hook is there for speed. Loads go on and come off in one motion – tools, cables, ropes, ladders, bags, stock on display – with no line to thread through an eye and no gate to open. The stem is standard metric external thread, M3 to M10, so it unscrews, takes a different hook, or passes through a thin non-magnetic bracket before seating in the base. Need a non-standard size or a different pull force? Please feel free to contact us at info@xf-magnet.com
Neodymium Open Hook Magnet (J-hook) Specifications List
| Product ID | D(mm) | h(mm) | h1(mm) | H(mm) | ThreadM | Pull Force(kg) |
| XF-OPHK-01 | 10 | 5 | 12.5 | 33 | M3 | 2 |
| XF-OPHK-02 | 16 | 5 | 12.6 | 35 | M4 | 8 |
| XF-OPHK-03 | 20 | 7 | 14 | 36 | M4 | 12 |
| XF-OPHK-04 | 25 | 8 | 17 | 45 | M5 | 20 |
| XF-OPHK-05 | 32 | 8 | 18 | 48 | M6 | 30 |
| XF-OPHK-06 | 42 | 8.6 | 18 | 48 | M6 | 70 |
| XF-OPHK-07 | 48 | 11 | 24 | 61 | M8 | 80 |
| XF-OPHK-08 | 60 | 15 | 28 | 64.5 | M8 | 150 |
| XF-OPHK-09 | 80 | 18 | 35 | 81 | M10 | 280 |
Note: The pull force is the test value under ideal conditions (direct attraction to a clean, flat 5mm thick low-carbon steel plate). In actual applications, factors such as paint, rust, air gaps, and thin steel plates will reduce the breakaway force.
Detailed Images

*We can make pot magnet according to your requirements, just let me know the above parameters and required pull force.
Key Features
1. Hang it and take it down with one hand: The mouth of the J is open — that’s the whole point. An eye bolt costs you two hands and a moment of attention every single time. And in a workshop, on a shop floor or in a commercial kitchen you reach for the same tool dozens of times a day. Here the item drops into the slot and lifts straight back out.
2. The hook unscrews M3, M4, M5, M6, M8, M10: Take the hook off and the base ships flat. Fit a different hook and the same mount does another job. Run the stem through a thin non-magnetic bracket first, and the magnet clamps from behind. One base, several hooks.
3. Mounts on steel, leaves nothing behind: The base sits on steel beams, machine frames, shelving, metal doors, steel walls. No drilling, no tapping, no adhesive and nothing to repair afterwards – no holes, no glue residue, no scratches. When a tool board or a display needs rearranging, pull the base off and set it down somewhere else.
Applications
The hook curves up into a J, so coiled air hose, extension cords and lanyards drop into the slot by themselves. Nothing to thread, clip or unlatch, and the upturn keeps the coil from sliding forward. On a machine frame or a welding table it holds the air hose and impact wrench off the floor between jobs. On steel tool cabinets and garage shelving it keeps coiled cable, safety glasses and hand tools within reach. In a cruise cabin, a metal locker or a container office, one hook turns a flat steel panel into somewhere to hang a toiletry bag, a coat or keys.



